What's the diameter of those Delkevic headers.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Harris Build
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: Harris Build
looking good
What's the diameter of those Delkevic headers.
What's the diameter of those Delkevic headers.
Re: Harris Build
zed1015 wrote:looking good
What's the diameter of those Delkevic headers.
According to my ancient verniers they measure 36mm.
Re: Harris Build
Dragged the Harris out of me cramped garage for a look, pretty pleased with how it’s looking, hopefully get the tank back at the weekend.
-
Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Re: Harris Build
That's looking rather lovely. 
# 104
Phil Churchett Award Winner 2011 & 2016
Buzzworkz Best Modified Zed 2016
Re: Harris Build
Ginger Bear wrote:That's looking rather lovely.
Thank you very much
Paint is going to be satin black with a kwak green stripe down the centre I think.
Re: Harris Build
cakeman wrote:zed1015 wrote:looking good
What's the diameter of those Delkevic headers.
According to my ancient verniers they measure 36mm.
How does that compare to the Harris diameter ?
1983 GPz750 uni-trak,2018 Z900RS Cafe'19 Dodge Challenger Hemi
Re: Harris Build
Rich, looking good like the original swing arm!
Not sure about TR Seat though it probably just needs dropping a tad to cover the frame rails but thats just my opinion
.
Top work though!
It should look very much like Ricardo's old bike,
.
Would also look good red.
Not sure about TR Seat though it probably just needs dropping a tad to cover the frame rails but thats just my opinion
.Top work though!
It should look very much like Ricardo's old bike,
.
Would also look good red.
Re: Harris Build
KWACKERZ1 wrote:Rich, looking good like the original swing arm!
Not sure about TR Seat though it probably just needs dropping a tad to cover the frame rails but thats just my opinion
Top work though!
It should look very much like Ricardo's old bike,
.Harris 2 wpowers.jpg
Would also look good red.
gs10003.JPG
Spent a long time pondering over the seat height Phil and decided I quite like being able to see the frame rails plus it’s a big help with leg room cos I’m a lanky sod lol.
Re: Harris Build
I so very nearly clicked on "buy it now" when that red Harris GS1000 was up for sale the other year....
Re: Harris Build
cakeman wrote:Well, a bit of progress at last after a bit of a false start with painting the engine silver.....Now satin black, pleased with the look.
IMG_0194.JPG
Where did you get the ign cover from please ?
1983 GPz750 uni-trak,2018 Z900RS Cafe'19 Dodge Challenger Hemi
Re: Harris Build
Simonic wrote:cakeman wrote:Well, a bit of progress at last after a bit of a false start with painting the engine silver.....Now satin black, pleased with the look.
IMG_0194.JPG
Where did you get the ign cover from please ?
It was already fitted when I got the bike, sorry.
Re: Harris Build
Ignition cover came from GRUMPY1260's.
Give Chris a bell on 07774924067.
Give Chris a bell on 07774924067.
Re: Harris Build
KWACKERZ1 wrote:Ignition cover came from GRUMPY1260's.
Give Chris a bell on 07774924067.
Thank You.
I've had one on order from him since May for my ST. Says he's having a delay with the bloke doing the casting........
1983 GPz750 uni-trak,2018 Z900RS Cafe'19 Dodge Challenger Hemi
Re: Harris Build
Started to prep the fairing for paint, I’ll have no fingerprints left at this rate lol
Who is online
Users browsing this forum: No registered users and 25 guests