Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Brass Tube

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Wayne1960
Custard Cream
Custard Cream
Posts: 688
Joined: 21st Aug 2013
Location: Kent England

Brass Tube

#1 PostAuthor: Wayne1960 » Sun Sep 27, 2020 2:00 pm

I am looking for the brass tube that fits at the base of the carb Mikuni VM26ss

I think it's the pick up pick up for the choke.

I notice one of mine being a good 6mm shorter than the rest

With the float bowl off its the fixed tube sits about 30mm above the body and has small airways.

I think it simply pushes in so it should pull out if anyone can help?
Just purchased a 1976 UK Z900 A4 for renovation. Wish me luck.
Bike now finished what a joy!
Top
Keefleaf
ZedHead
ZedHead
Posts: 1211
Joined: 24th May 2007
Location: Isle of Wight

Re: Brass Tube

#2 PostAuthor: Keefleaf » Sun Sep 27, 2020 5:28 pm

You can buy it on Enay.
Top
Keefleaf
ZedHead
ZedHead
Posts: 1211
Joined: 24th May 2007
Location: Isle of Wight

Re: Brass Tube

#3 PostAuthor: Keefleaf » Sun Sep 27, 2020 5:29 pm

EBay :rock
Top
Wayne1960
Custard Cream
Custard Cream
Posts: 688
Joined: 21st Aug 2013
Location: Kent England

Re: Brass Tube

#4 PostAuthor: Wayne1960 » Sun Sep 27, 2020 7:14 pm

Ok great what should I search for?
Just purchased a 1976 UK Z900 A4 for renovation. Wish me luck.

Bike now finished what a joy!
Top
kev edwards
Hardcore
Hardcore
Posts: 2149
Joined: 3rd Apr 2009
Location: leverington UK

Re: Brass Tube

#5 PostAuthor: kev edwards » Mon Sep 28, 2020 7:03 am

Just type in brass tube, isn't there a jet pressed into the bottom of the tube as well, type in brass tube of the right diameter you will need the inside diameter as well, send me the outside measurement, if it is the same as the overflow tube i have some as i made overflows to replace broken ones.

https://www.ebay.co.uk/itm/Top-Brass-Tu ... 54152e0cf5

https://www.ebay.co.uk/itm/Brass-Tube-P ... SwTfdbM2yA
Top
User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

Re: Brass Tube

#6 PostAuthor: Pigford » Mon Sep 28, 2020 9:48 am

The brass tubes have been known to split causing problems.

An easier repair option may be to locate a small diameter plastic pipe and slide that over the brass tube?
And on the 7th day... Zeds were created!
Top
User avatar
KeithZ1R
Moderator
Posts: 3072
Joined: 15th May 2005
Location: Bury

Re: Brass Tube

#7 PostAuthor: KeithZ1R » Mon Sep 28, 2020 11:53 am

I have had success soldering cracks in the brass tubes cleanliness is the key
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
User avatar
zed1015
Hardcore
Hardcore
Posts: 4027
Joined: 2nd Nov 2005
Location: Somewhere between Scunny and Goole.

Re: Brass Tube

#8 PostAuthor: zed1015 » Mon Sep 28, 2020 12:06 pm

The tube isn't broke it's just shorter than the rest.
He needs a stock length one around 30mm.
Top
Wayne1960
Custard Cream
Custard Cream
Posts: 688
Joined: 21st Aug 2013
Location: Kent England

Re: Brass Tube

#9 PostAuthor: Wayne1960 » Mon Sep 28, 2020 3:06 pm

Hi Kev

The tube has very small holes in it so not just a tube.
Just purchased a 1976 UK Z900 A4 for renovation. Wish me luck.

Bike now finished what a joy!
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: Bing [Bot] and 52 guests