Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

pistons

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
Simon Jones
100Club
100Club
Posts: 132
Joined: 9th Mar 2005
Location: Bridgewater

pistons

#1 PostAuthor: Simon Jones » Thu Dec 31, 2020 4:25 pm

I have a 1170 wisco kit and and oil ring has picket up
Does any one know if i can get a .25 mm oversize piston kit instead of going out to 1260 cc which i believe is the next piston size wisco do
Thanks in advance
Simon
75 z1b 75 h2c z1100r rd400 z1000a1 TS125
Top
User avatar
Al
Hardcore
Hardcore
Posts: 2916
Joined: 21st Oct 2007
Location: Farnbronx, Sin City, N.E. Hants

Re: pistons

#2 PostAuthor: Al » Thu Dec 31, 2020 6:57 pm

There is no oversize for the 1170 kit, it bores std liners 'till nearly transparent. Next one up requires oversize liners. Cheapest way out is another 1100 liner and have that bored to the piston size you have.
What has been damaged? Liner or piston also?
AL
1981 J1
Top
Simon Jones
100Club
100Club
Posts: 132
Joined: 9th Mar 2005
Location: Bridgewater

Re: pistons

#3 PostAuthor: Simon Jones » Fri Jan 01, 2021 8:41 am

It is 3 liners pistons seem ok
75 z1b 75 h2c z1100r rd400 z1000a1 TS125
Top
Simon Jones
100Club
100Club
Posts: 132
Joined: 9th Mar 2005
Location: Bridgewater

Re: pistons

#4 PostAuthor: Simon Jones » Fri Jan 01, 2021 3:36 pm

DOES any other piston manufacturers make pistons slightly smaller iv always been concerned about the boor thickness
75 z1b 75 h2c z1100r rd400 z1000a1 TS125
Top
zippy
Regular Poster
Posts: 55
Joined: 10th May 2017
Location: renfrewshire

Re: pistons

#5 PostAuthor: zippy » Fri Jan 01, 2021 4:33 pm

1136 kits from both Wiseco and MTC.
Top
User avatar
Al
Hardcore
Hardcore
Posts: 2916
Joined: 21st Oct 2007
Location: Farnbronx, Sin City, N.E. Hants

Re: pistons

#6 PostAuthor: Al » Fri Jan 01, 2021 9:28 pm

18mm
AL
1981 J1
Top
zippy
Regular Poster
Posts: 55
Joined: 10th May 2017
Location: renfrewshire

Re: pistons

#7 PostAuthor: zippy » Fri Jan 01, 2021 11:09 pm

MTC it is then.
Top
Simon Jones
100Club
100Club
Posts: 132
Joined: 9th Mar 2005
Location: Bridgewater

Re: pistons

#8 PostAuthor: Simon Jones » Sat Jan 02, 2021 11:58 am

Thank again for all your help i got a set of std barrels from Zippy top man and a MTC 1136 piston kit from pitstop in the states
75 z1b 75 h2c z1100r rd400 z1000a1 TS125
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 47 guests