Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 MK11/ST Frame
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
poontang19
- new poster
- Posts: 2
- Joined: 17th May 2021
- Location: SAMATAN
Z1000 MK11/ST Frame
Can any one tell if the Z1000 MK11 and ST Frames are different
Re: Z1000 MK11/ST Frame
Yes! The most noticeable difference is that the ST shaft drive frame is wider at the S/A pivot and has cast steel pivot
mounts .
MK2 frame is basically the same as a Z1R.
mounts .
MK2 frame is basically the same as a Z1R.
Re: Z1000 MK11/ST Frame
The frames are very different, it is impossible to swap MK2 and ST bodywork and seat without cutting and welding.. and of course the already mentioned width on the left side where the shaft middle gear resides..
Re: Z1000 MK11/ST Frame
Hi poontang19
if you want to know more about the Z1000ST and the MK2, have a look here:
viewtopic.php?f=46&t=44425
You can see the topic if you're a PUM.
GrtZ
Philippe
if you want to know more about the Z1000ST and the MK2, have a look here:
viewtopic.php?f=46&t=44425
You can see the topic if you're a PUM.
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Who is online
Users browsing this forum: kawasaki_man and 41 guests