Z1r rear frame

[Tony]

Yes you’re correct the front seat mounts and the left hand pillion peg mount

[Tony]

Hey compo is that your red frame

[Z1streetfighter71]

Yes you’re correct the front seat mounts and the left hand pillion peg mount

I’m in the same boat, I’m missing seat brackets, turn signal ears and the seat latch on one of my frames along with the light bracket. I figured all of those things were unobtainable so I drew my own. This is currently being cut right now. I’ve decided to try and make my own light bracket. Still doing the drawing for that one.

[Tony]

Hi street fighter keep us posted how things turn out looks like it will be a big job cheers tony

[compo z1r]

Yes you’re correct the front seat mounts and the left hand pillion peg mount

I’m in the same boat, I’m missing seat brackets, turn signal ears and the seat latch on one of my frames along with the light bracket. I figured all of those things were unobtainable so I drew my own. This is currently being cut right now. I’ve decided to try and make my own light bracket. Still doing the drawing for that one.
IMG_4063.png

Light bracket ? Rear ?

[compo z1r]

U want one of these as original u will have to extend indicator stem or renew easy or use as is tail tidy ?


https://www.ebay.co.uk/itm/396474629503 ... media=COPY

[Z1streetfighter71]

Yes you’re correct the front seat mounts and the left hand pillion peg mount

I’m in the same boat, I’m missing seat brackets, turn signal ears and the seat latch on one of my frames along with the light bracket. I figured all of those things were unobtainable so I drew my own. This is currently being cut right now. I’ve decided to try and make my own light bracket. Still doing the drawing for that one.
IMG_4063.png

Light bracket ? Rear ?

Yea mate same as tony but not missing as much. , i have one frame from the indicators back missing but void of any brackets or mounts and another frame missing the seat latch and mounts. ill fabricate most of it as im fairly good with the fiddly bits as i used to design and build tattoo machines for many a year.

[compo z1r]

The z250 has the same light bracket as a z1r but with indicator stalks 24mm a side shorter a lot fitted them back in the day to tidy up back end easy to fix 2 welds ground off and replace tube with one 48mm longer easy done

[Z1streetfighter71]

:D The z250 has the same light bracket as a z1r but with indicator stalks 24mm a side shorter a lot fitted them back in the day to tidy up back end easy to fix 2 welds ground off and replace tube with one 48mm longer easy done

I read that about the Z250 light unit, handy in a pinch. Both me and Tony are missing the bracket on the frame, as below.

Screenshot 2025-04-15 at 15-49-33 4afc9bd0-e39b-46f8-8968-25276ccf8956 (JPEG Image 960 × 720 pixels).png (805.53 KiB) Viewed 4824 times

[compo z1r]

that's part of frame and do's not have a part No though a chap on ebay makes them and toon at the z1r owners register has made one or 2 so can b bought !! make sure the mounts for the cover is correct or the seat lock opening in the cover don't line up with the lock seen it happen ok